CLASSES START AT 10:00AM and last 1-2hrs each

Arduino Classes - Presented by Caz Bowyer

All the Arduino Uno micro-controller classes will require a *Windows laptop* so participants can code (C++) their arduino.  We will be using the arduino IDE Software which you can download prior to the class here: https://www.arduino.cc/en/main/software.

First Session - July 7th will mostly just be the set-up of the software and settings so that everyone can easily code their arduino and work with inputs.  This is a beginner's class.

Session 2 - July 14 will be a continuation of the beginner's class getting everyone acquainted with basic hardware and programming and a focus on motor control.

Session 3 - July 21 will be a more intermediate class for those with a basic understanding of Arduino looking to learn more building some fun projects involving real time clocks.

Session 4  - July 28 will be a more intermediate class for those with a basic understanding of Arduino looking to learn more building some fun projects involving temperature and humidity measurements.

*This class requires a *Windows laptop* (you may bring an Apple Laptop with program already setup, but instructor may not be able to help you do the software setup).  This class is $15 per person if registered before July 1st and less than $80 worth of parts purchased separately at the store (The instructor will help navigate which parts to buy before each class).    If you have a group you wish to bring in, please contact Chris for group pricing and details.

General Electronics Classes - Bill Werzner & Tom Taylor

Session 1 - July 6 Learn basic controls and use of Volt-Ohm Meters and testing circuits (AC/DC, testing batteries, voltage, resistance current, & etc...)

Session 2 - July 13 Understanding resistive and capacitive circuits

Session 3 - July 20 Learn to test vacuum tubes and basic trouble shooting of tube amplifiers

Session 4 - July 27 General Troubleshooting Tube type radios/amplifiers

This class is $15 per person if registered before July 1st and does not require purchase of any other materials.  If you have a group you wish to bring in, please contact Chris for group pricing and details.